Using the Control Panel to Make Printer Settings | 63
4. Press the [#Enter] key.
5. Press [ ] or [ /Menu] key to select the lead time needed to switch to the Energy
Saver mode.
6. Press the [#Enter] key.
7. Press the [Escape] key.
Using the [Host Interface] Menu
In the [Host Interface] menu, you can specify settings related to connection and
communication. Settings made using the [Host Interface] menu remain effective even if you
turn the printer off.
To configure the printer's network settings, use the [Network Setup] menu.
I/O Timeout
Specify how long the printer waits for the currently-connected interface to respond.
When the specified time elapses, the printer can receive data from another interface.
If you make the I/O Timeout period too short, timeout might occur while data transfer is
in progress. If this happens, the print job will be interrupted by a new job from another
interface.
You can specify a timeout between 10 and 60 seconds.
Default: [
15 seconds
]
Network Setup
You can make network-related settings.
Printer Name
Displays the printer's name.
Host Name
Displays the printer's host name.
Domain Name
Displays the printer's domain name.
IPv4 DNS
Specify the DNS server settings under IPv4.
If DHCP is off, enter the IPv4 addresses for the primary and secondary DNS
servers in the format "xxx.xxx.xxx.xxx" (where each x represents a digit).
System:
Energy Saver
E.Saver Timer:
*5 minutes
