sauter NRT407, Руководство пользователя

Страница: 49 / 76

NRT407 manual Part III Configuration 49
Parameter
number
Description FS
16 State connected sensor on UI1: (except NRT407F901 / F902)
0=None
1=Change-over digital
2=Change-over analogue 2
17 State connected sensor on DI1:
1=Window contact
2= No function
3= Presence detector
4=Change-over sensor (NRT407F901 / F902) 1
18 State connected sensor on DI2:
1=Window contact
2=Condensation detection
3=No function
4=Change-over sensor (NRT407F901 / F902) 2
20 State connected function on UO1:
0=None
1=Thermal actuator heat
2= None
3=Heating actuator 0...10 V
4= None
5=On/off actuator heat
6= None 3
21 State connected function on UO2:
0= None
1= None
2=Thermal actuator cool
3= None
4=Cooling actuator 0…10 V
5= None
6=On/off actuator cool 4
22 State connected function on UO3:
0= None
1=Forced vent. digital
2=Analogue output (OEM)
3=None
4=Ordinary analogue output
5=None
6=Control of EC fan 1
24 Y3 output in manual mode (only if Y3 is configured as an analogue output;
not available for NRT407F902) 0 %
28 State output signal range for Y3-actuators:
0=0…10 V
1=2…10 V
2=10…2 V
3=10…0 V 0
29 State output signal range for heating actuators:
0=0…10 V
1=2…10 V
2=10…2 V
3=10…0 V 0
30 State output signal range for cooling actuators:
0=0…10 V
1=2…10 V
2=10…2 V
3=10…0 V 0
31 Period time for heating actuators with thermal actuator 60 s
32 Period time for cooling actuators with thermal actuator 60 s
33 Run time for heating actuators with increase/decrease actuators 120 s
34 Run time for cooling actuators with increase/decrease actuators 120 s
35 Neutral zone for increase/decrease actuators 2%
36 Time in hours between exercise of heating actuators 23h
37 Time in hours between exercise of cooling actuators 23h
38 Hysteresis for on/off actuators and heating 2K
39 Hysteresis for on/off actuators and cooling 2K
40 Minimum limit for the heat output 20 %