sauter NRT407, Руководство пользователя

Страница: 36 / 76

36 Part III Configuration NRT407 manual
Central control
Central control of the operating mode is also possible. By changing the variable
NRTRemoteState , you can control the operating mode centrally according to the following
table (there is a variable list for central control in Part IV of this manual):
NRTRemoteState Description
0 Central operating mode Off
1 Central operating mode Unoccupied
2 Central operating mode Standby
3 Central operating mode Occupied
4 (Not used)
5 (FS) No central control
Table 6. The variable NRTRemoteState
The occupancy button
When using central control (i. e. NRTRemoteState <> 5) and you press the Occupancy
button, the controller will change to Bypass and stay in this mode for as long time as you
have configured. If you press the Occupancy button again when the controller is in Bypass,
the controller will change to Stand-by, regardless of what has been set in the central control
(NRTRemoteState).
When the controller is in Bypass and the Bypass time has run out, the controller will change
to the operating mode given by
NRTRemoteState . If NRTRemoteState equals 5 it will
change to the preset operating mode.
If the controller is in Stand-by and the central control is changed, the controller will change
to this new operating mode.
Occupancy detector When central control is used and the occupancy detector is activated, the controller will go to
Bypass for a configurable time, and thereafter return to the central operating mode.
Central command
Via central commands from a comprehensive system, for example nPOpen, you can handle
the controller in the same way as you handle it locally via the Occupancy button, i. e. you
can change its operating mode to Off/Unoccupied (Shutdown) or Bypass.
Central commands should be regarded as events and can be changed locally via the
Occupancy button.
Off/Unoccupied Bypass
Command Bypass Command ”Shutdown”