22
9
CONFIGURATION MENU
PARAMETER
DESCRIPTION
Using this menu, the user can configure the different reference parameters for the Flue gas analysis.
9.1.
Using this menu, the user can configure the different reference parameters for the instrument.
SEE CHAPTER 9.2.
In the submenu, you can enter or modify the name of the operator who is carrying out the analysis. It is possible to
enter up to 8 names.
It is also possible to select the name of the operator, which will be printed on the analysis ticket.
Alarm management – in this submenu, you can control and register ten different alarms.
For each one you can define the
Alarm
Alarm
parameter to be noted (gas, pressure,
Ta, Tf), the intervention threshold with the
Temperature °C
Maximum alarm type
the relative unit of measurement and
whether it is an alarm for the minimum
or maximum level.
Threshold
A minimum level alarm will raise
an alert when the measurements
Measured
fall below the set threshold and the
value
maximum alarm will be raised when the
measurement exceeds the chosen threshold.
Minimum level alarm Alarm
Display information about the status of the instrument.
Using this menu, the user can verify any possible anomalies in the instrument.
Select the desired language for the display of the different menus and for printing the report.
Restore to factory settings.
KEY
FUNCTION
Enables the displayed interactive operations.
Return to the previous page.
15/01/14
10:00
Configuration
Analysis
Instrument
Operator
Alarms
Information
Diagnostic
Language
Restore
CONTEXT KEY
FUNCTION
◄
Select the available parameters.
OK
Enter the selected parameter.
►
Select the available parameters.
Analysis
Operator
Alarms
Diagnostic
Language
Restore
Minimum level alarm Alarm
Time
Threshold
