Belonging to
To protect your family
CO922 -
V. 2
CO922 Carbon monoxide Gas Detector
This equipment is designed to protect individuals from acute exposure to carbon monoxide.
This equipment will not completely protect the Individuals with specific medical conditions.
In doubt, consult a doctor.
230 VAC
230 VAC
230 VAC
Important: Assembly / maintenance of the appliance must be carried out by qualified personnel and in
accordance with applicable laws and regulations.
The manufacturer assumes no responsibility for the use of products that have to comply with particular
environmental and / or installation standards.
Important note
Before connecting the equipment, it is recommended that you read the instruction manual carefully and
keep it for future reference. It is also recommended to perform the electrical connections correctly as
per enclosed drawings, observing the instructions and the Standards.
N.B. Refer to the documentation in all cases where the symbol is on the side
Channel: Beinat gas solutions
Electric connections also available on
CONFORMITY
Installation and user
guide
EN 50291
EN 50270
CEI 216-3
EN 61010-1
Installation EN 60079-29-2
The CO922 detector has been designed and built according to European regulations to detect the
presence of CO toxic gas.
A microprocessor is used to create a complete surveillance and control system with maximum flexibility.
Thanks to this and its other features, this detector is suitable for household applications.
The gas detected by the CO922 is Carbon Monoxide, when both the maximum CO admissible concentration
threshold of 300ppm is exceeded, and when low CO concentrations persist in the environment for lengthy
periods, which according to the principle of accumulation could also damage the human organism.
The probe can activate solenoid valves, sirens, and any other signal or alarm handling devices using the
built-in relay. A series of technical features make this detector extremely versatile, reliable, accurate,
and safe.
The relay, free of voltage, allows installation of multiple detectors on a single solenoid valve or suction
fan, ensuring control of multiple dangerous environments.
The detector is complete with a special circuit that controls the sensor’s efficiency level, and signals any
possible fault. The external container has an IP42 protection degree.
