Operation
Analysis and Test Functions
The display (shown here on the right) is
divided into six areas. These are named
in the list at the far right, and described
in detail below.
Info line:
This line shows the following:
– User name
– Date and time
Bar graph:
This line shows a checkweighing
bar graph shown (upper illustration)
or a net-weight bar graph (middle
illustration).
The latter shows absolute values
(in the example, 0 to 70 g) while the
former shows a target weight (setpoint)
and upper and lower tolerance values
(user-definable).
The checkweighing bar graph is shown
if
Setpt./tolerance
or
Minimum/
maximum
is set for the initial weight.
The net-weight bar graph is shown
if
Off
is set for the initial weight.
During analysis, this line shows a scale
of 0 to 100% as well as the percentage
of solids in the initial weight (lower
illustration).
Measured value/result line:
This line shows the weight readout
(with the weight unit, at stability)
or a calculated value, a plus or minus
sign, and the weight unit displayed.
Text lines:
The text lines show details on the
selected program; for example, the
program name (short form), detection
method and drying process.
Prompt/activity line:
This line shows either of the following:
– An operator prompt (middle illustra-
tion): white characters on green
background.
– A message on the current status
or activity of the moisture analyzer
(lower illustration): red characters on
yellow background.
Touchscreen keys:
Up to five keys are depicted at the
bottom of the screen for operation of
the analyzer or screen navigation
(for example, the arrows in the lower
illustration).
Info line
Bar graph line (in this example:
checkweighing bar graph)
Measured value line
Text line 1
Text line 2
Text line 3
Text line 4
Text line 5
Prompt (green) / Status (yellow)
Touchscreen buttons
Prompt:
white characters on green background
Status:
red characters on yellow background
8
