Example: Defining a new user (Name: Jones) and access controls for the “Supervisor” user group
Prerequisite: Administrator rights
Step
Key (or instruction)
Display/output
1. Open the Setup menu
Tap the
Setup
line
With: administrator rights:
Manage programs
Evaluation of results
Configuration
Calibration
Security management
Info
2. Open the User Name input window
Select the following menu items:
Security management
Modify user data
Configure new user
3. Enter the new user name and
Tap the required letters, numbers, or
User Jones
confirm your input
special characters (in this example:
Jones
)
Group Operator
and press the
key
PIN *
4. Select the “Supervisor” group
Tap the
button
Group Supervisor
and press the
key
5. Open the “PIN” input window
Tap the
button
and press the
key
6. Enter the PIN and confirm
Tap your choice of 4 digits (in this example:
1234
)
Press the
key
7. Enter the same PIN again
1234
and confirm
and press the
key
8. Exit this menu level
Press the
key
Save changes?
Yes/No
9. Save changes
Tap the
Yes
button
10. Select “Access control, supervisor”
Tap the
button
(settings are applied to all “Supervisors”
and press the
key
11. Define the desired access rights
Tap the
or
buttons as needed
and switch rights on or off
and press the
key
12. Save changes
Press the
key
Tap the
Yes
button
13. Close the Setup menu
Press the
key 3 times
12
