1
In [AGC], select “ON”.
2
In [MAX GAIN], select the maximum gain level for AGC and click
SET
.
Selecting a higher gain level will improve the camera sensitivity in a dark condition, but increase the noise as well.
NORMAL:
For normal subject
MIDDLE:
For slightly dark subject
HIGH:
For dark subject
The maximum gain value varies depending on the Day/Night mode.
If you set [AGC] to “OFF”, you cannot enable the electronic sensitivity boosting function (in [SENSE
UP] in [IRIS]).
You cannot select “OFF” in [AGC] if the Day/Night function ([DAY/NIGHT]) is set to “AUTO” or the
electronic sensitivity boosting ([SENSE UP] in [IRIS]) is enabled.
1
In [AGC], select “OFF”.
2
In [GAIN SETTING], select the gain value of AGC and click
SET
.
0dB, 3dB, 6dB, 9dB, 12dB, 15dB, 18dB, 21dB, 24dB, 27dB, 30dB, 33dB, 36dB, 39dB, 42dB
The Day/Night function improves the camera's sensitivity by automatically switching the camera to the color mode
in bright conditions and to the black-and-white mode in dark situations.
Using this function enables 24-hour surveillance with clear video images even during nighttime or in dark locations.
You may also fix the camera to the color or black-and-white video mode without using the Day/Night function.
Automatically switching camera between color and black-and-white video modes using Day/Night
function
Switching camera between color and black-and-white video modes when an external control signal is
received
Working with Administrator Configuration Screens 31/79
