Sanyo DSR-M810P, Инструкция по эксплуатации

Страница: 42 / 326

6 RS-485/NETWORK SET
English
41
[Settings] ( ‹ indicates default setting.)
3
Press the [ ] and [ ] buttons to select
the desired item, then press the [ ]
button.
4
Press the [ ] and [ ] buttons to
change the setting, then press the
[
] button.
5
Use the same procedure to set the other
items as needed.
6
Press the [EXIT/OSD] button.
The display returns to the normal screen.
Use the following procedure to specify whether or not
recording is to be stopped when the [REC] button on the
separately-sold VA-RMN01 wired remote controller is
pressed. When a setting of “ENABLE” has been made, the
remote controller's [REC] button can be pressed for 2
seconds or longer to stop recording.
z Regardless of this setting, if the [REC] button is pressed
and released quickly (i.e., within 2 seconds), recording
will be started.
1
Press the [MENU] button.
The MENU indicator lights up and the <MAIN MENU>
screen appears.
Select “6.RS-485/NETWORK/REMOTE SET” and press
the [
] button.
The <RS-485/NETWORK/REMOTE SET> screen
appears.
2
Press the [ ] and [ ] buttons to select
“REC STOP” and press the [ ]
button.
“DISABLE” flashes.
3
Press the [ ] and [ ] buttons to
change the setting, then press the
[
] button.
[Settings] (
‹
indicates initial setting.)
4
Press the [EXIT/OSD] button.
The display returns to the normal screen.
Item Setting Description
(1)
REMOTE AS VCR When the digital video recorder is operated
from a controller, sets it to operate as a
VCR. Use VCR when using VSP-7000.
‹ DVR When the digital video recorder is operated
from a controller, sets it to operate as a
digital video recorder.
(2)
DATA SPEED Used to select the communication speed.
Selections: 19200/2400/4800/9600
(3)
STATUS INFO ON Status information is sent.
‹ OFF Status information is not sent.
(4)
ALARM INFO ON Alarm information is sent.
‹
OFF Alarm information is not sent.
(5)
ADDRESS* Set the digital video recorder’s address
when using RS-485.
Setting range: 000 to 127
Setting REMOTE SET
Setting Description
‹ DISABLE Recording will not be stopped when the remote
controller’s [REC] button is pressed.
ENABLE Recording will be stopped when the remote
controller’s [REC] button is pressed for at least
2 seconds.
e00_l8hae_xe_7.book Page 41 Monday, July 5, 2004 10:02 AM