S&C 5800 Series, Руководство по устранению неисправностей

Страница: 21 / 34

S&C Instruction Sheet 1041-550
21
IntelliLINK
Figure 7. TROUBLESHOOTING: Control & Switch Information screen.
This screen includes the following fields:
Software Product Identification
This is a 2-line field:
• The first line is the S&C name for the Control software version present in thisswitch
control (for example, SNCD2S0X).
• The left side of the second line is the revision number for the IntelliLINK versionthat
is presently loaded into memory on your computer.
• The right side of the second line is the revision number and date for the Control
software in the switch control.
If the IntelliLINK version is older than the Control software, this field includes the
message
Unrecognized/superseded . If the IntelliLINK version is newer than the Control
software, this field includes the message (Not Current Release) .
If you try to start the IntelliLINK software for a different S&C product (for example, an
S&C 2801 control) while your portable computer is connected to the 5800 Series Switch
Control, the IntelliLINK software terminates during startup and displays an error message.
Enc.
This is a six-digit hexadecimal encoding of the name/version information for the software
in the switch control. This code is used by S&C staff during software troubleshooting.
Please have this code available when you call S&C about a problem.
Target Hardware, Sensor Type
This is the type of switch hardware and sensors that this switch control is designed for.