Samyung ENC SMR-715 series, Инструкция по эксплуатации

Страница: 133 / 192

107
Chapter 8 DETAIL PERFORMANCE SETTINGS
8.5.3 SYSTEM TIME CLEAR
If you press YES, the operation will be executed immediately.
The operating time of the display unit can be initialized.
8.5.4 SCANNER TIME CLEAR
Initialize the transmit time when
magnetron is replaced.
Initialize the transmit time when
motor is replaced.
Initialize the Scanner Running time.
Initialize the Transmit time.
Save the following scanner time data stored in the scanner into the display unit.
Scanner Transmit Time
Motor Rotating Time
When replacing the scanner internal control circuit, perform the procedure below to inherit scanner time data.
1. Save the scanner time data.
2. Replace the scanner internal control circuit.
3. Restore the scanner time data.
Restore the scanner time data stored in the display unit into the scanner internal control circuit.
Initialize those operating time above when magnetron or scanner motor is replaced.