Samyung ENC SMR-715 series, Инструкция по эксплуатации

Страница: 152 / 192

126
Chapter 9 MAINTENANCE AND CHECK
Alarm Code Alarm Name Class Description
D001
GPS Port Alarm
Serial driver error occurs during COM1 port communication.
D002
Gyro/Compass Port Alarm
Serial drive error occurs during COM2 port communication.
D003
NMEA Port Alarm
Serial driver error occurs during COM3 port communication.
D004
Scanner Port Alarm
Serial driver error occurs during COM4 port communication.
D005
GYRO(Time Out) Alarm
For heading equipment=GYRO, cannot receive valid sentences
(including checksum error) which had been received properly.
D006
Log(Time Out) Alarm
For speed equipment=log, cannot receive valid sentences
(including checksum error) which had been received properly.
D007
GYRO(Data) Alarm
For heading equipment=GYRO, the GYRO error bit of NSK
communication data is set.
D008
Log(Data) Alarm
For speed equipment=log, the LOG error bit of NSK
communication data is set.
D009
Heading(Time Out) Alarm
For heading equipment=compass, cannot receive valid NMEA
bearing sentences (including checksum error) which had been
received properly.
D010
Heading(Data) Alarm
For heading equipment=compass, cannot receive valid NMEA
bearing data which had been received properly.
D011
2AXG(Time Out) Alarm
For speed equipment =2-axis log, cannot receive valid VBW
sentences(including checksum error) which had been received
properly.
D012
2AXG(Data) Alarm
For speed equipment=2-axis log, cannot receive valid VBW
ground data which had been received properly.
D013
GPS(Time Out) Alarm
Cannot receive valid GPS sentences(including checksum error)
which had been received properly.
D014
GPS(Position) Alarm
Cannot receive valid position data which had been received
properly.
D015
GPS(Datum) Alarm
Cannot receive valid geodetic data which had been received
properly.
D016
GPS(Speed) Alarm
For Speed equipment=GPS, cannot receive valid speed data
which bad been received properly.
D017
GPS(Status) Alarm
Received GPS fixing status error (invalid) data
D018
Depth(Time Out) Alarm
Cannot receive valid depth sentences (including checksum error)
which had been received properly.
D019
Depth(Data) Alarm
Cannot receive valid depth data which had been received
properly.
D020
TEMP(Time Out) Alarm
Cannot receive valid water temperature sentences which had
been received properly.
D021
TEMP(Data) Alarm
Cannot receive valid water temperature data which had been
received properly.
D022
Wind(Time Out) Alarm
Cannot receive valid wind direction/wind velocity sentences
(including checksum error) which had been received properly.
D023
Wind True(Data) Alarm
Cannot receive valid wind direction/wind velocity (true) data had
been received properly.
D024
Wind Relative(Data) Alarm
Cannot receive valid wind direction/wind velocity (relative) data
had been received properly.
D025
Turn(Time Out) Alarm
Cannot receive valid turning ratio sentences (including checksum
error) which had been received properly.
D026
Turn(Data) Alarm
Cannot receive valid turning ratio data which had been received
properly.
D027
Rudder(Time Out) Alarm
Cannot receive valid steering direction sentences (including
checksum error) which had been received properly.
D028
Rudder(Data) Alarm
Cannot receive valid steering direction data which had been
received properly
D029
AIS(Time Out) Alarm
For AIS function=ON, cannot receive valid AIS data (including
checksum error) which had been received properly.
D030
AIS(Data) Alarm
For AIS function=ON, cannot receive valid AIS data which had
been received properly.