Samsung WEC8050 Скачать руководство пользователя страница 663

Страница: 663 / 689

ANNEX C. Open Source Announcement (WEA300/WEA400 Series)

page 663 of 689

THE SOFTWARE IS PROVIDED “AS IS” AND ISC DISCLAIMS ALL WARRANTIES

WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES

OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL ISC BE LIABLE

FOR ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR

ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR

PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER

TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR

PERFORMANCE OF THIS SOFTWARE.

Internet Systems Consortium, Inc.

950 Charter Street

Redwood City, CA 94063

<[email protected]>

http://www.isc.org/

Flex License

This code is derived from software contributed to Berkeley by Vern Paxson.

The United States Government has rights in this work pursuant to contract no. DE-AC03-

76SF00098 between the United States Department of Energy and the University of

California.

Redistribution and use in source and binary forms with or without modification are

permitted provided that:

1) source distributions retain this entire copyright notice and comment, and

2) distributions including binaries display the following acknowledgement: “This product

includes software developed by the University of California, Berkeley and its

contributors”

in the documentation or other materials provided with the distribution

and in all advertising materials mentioning features or use of this software.

Neither the name of the University nor the names of its contributors may be used to

endorse or promote products derived from this software without specific prior written

permission.

THIS SOFTWARE IS PROVIDED “AS IS” AND WITHOUT ANY EXPRESS OR

IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED

WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR

PURPOSE.

Содержание WEC8050


















































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание WEC8050

Отзывы:

Бренды по названию

Популярные бренды

Samsung WEC8050, Руководство по эксплуатации

Результаты поиска

Содержание WEC8050

Отзывы:

Бренды по названию

Популярные бренды