Samsung WEC8050, Руководство по эксплуатации

Страница: 293 / 689

CHAPTER 6. Wi-Fi Configuration
© SAMSUNG Electronics Co., Ltd. page 293 of 689
4) Configure a default DSCP value per packet.

dscp-tag [PACKET_TYPE] [DSCP TAG]
Parameter Description
PACKET_TYPE Packet type configuration (voice/video/best_effort/background)
DSCP_TAG Default DSCP value
5) Configure a protocol to distinguish packet types.

protocol [PROTOCOL]
Parameter Description
PROTOCOL Protocol configuration (none/dot1p/dscp)
- none: Determine the type of every incoming packet with best effort.
- dot1p: Judge the packet type by checking the 802.1p field of an
incoming packet.
- dscp: Judge the packet type by checking the DSCP field of an
incoming packet.
The packet judgment criteria are as follows: For example, if the packet type is voice,
the 802.1p input value is 6 or 7 and the input range of DSCP value is 46-63.
Also, if the packet type is video, the 802.1p input value is 4 or 5 and the input range of
DSCP value is 24-45.
802.1p DSCP Packet type
6, 7 46~63 voice
4, 5 24~45 video
0, 3 0~7, 16~23 best effort
1, 2 8~15 background
6) To check the configured policy and QoS parameter information per packet, use the
‘show 80211a[|80211bg] qos policy’ command.
Configuration using Web UI
In the menu bar of <WEC Main window> , select <CONFIGURATION> and then select
the <RADIO>

<802.11a/n> or <802.11b/g/n>

<QoS> menu in the sub-menus.
1) Select one out of None/Default/User Priority in the 802.1P POLICY drop-down list of
Tagging Policy.
2) To disable a DSCP policy in the DSCP POLICY, select Disable.
3) To enable a DSCP policy in the DSCP POLICY, select Enable.
a) Select one out of Inner Packet/Default Value in the OUTER DSCP drop-down list.
b) Select one out of No Mark/Default Value in the INNER DSCP drop-down list.