Samsung WEC8050 Скачать руководство пользователя страница 662

Страница: 662 / 689

ANNEX C. Open Source Announcement (WEA300/WEA400 Series)

page 662 of 689

BSD 3-clause

“New” or “Revised” License

Redistribution and use in source and binary forms, with or without modification, are

permitted provided that the following conditions are met:



Redistributions of source code must retain the above copyright notice, this list of

conditions and the following disclaimer.



Redistributions in binary form must reproduce the above copyright notice, this list of

conditions and the following disclaimer in the documentation and/or other materials

provided with the distribution.



Neither the name of the <ORGANIZATION> nor the names of its contributors may be

used to endorse or promote products derived from this software without specific prior

written permission.

THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND

CONTRIBUTORS “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES,

INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF

MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE

DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR

CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,

SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT

NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;

LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER

CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,

STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)

ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF

ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

DHCP License

by Internet Software Consortium

Permission to use, copy, modify, and distribute this software for any purpose with or

without fee is hereby granted, provided that the above copyright notice and this permission

notice appear in all copies.

Содержание WEC8050


















































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание WEC8050

Отзывы:

Бренды по названию

Популярные бренды

Samsung WEC8050, Руководство по эксплуатации

Результаты поиска

Содержание WEC8050

Отзывы:

Бренды по названию

Популярные бренды