Samsung Ubigate iBG3026, Руководство по настройке

Страница: 678 / 718

CHAPTER 35. Call Admission Control
636
© SAMSUNG Electronics Co., Ltd.
DS0 busyout
When E1/T1 Digital Trunk is used, provides a method to set up busyout status
of specific timeslots.
In case of Analog port, use ‘busyout forced’ command in Voice-port
configuration mode of appropriate voice-port in order to set up busyout.
In case of Digital trunk, use ‘busyout forced’ command in Voice-port
configuration mode of appropriate voice-port in order to set up busyout at a
unit of DS0-Group. It provides a set up method in case of setting up busyout at
a unit of specific timeslot.
To force a DS0 time slot on a controller into the busyout state, use the
ds0
busyout command in Voice-port configuration mode. To remove the DS0
time slot from the busyout state, use the no form of this command.
ds0 busyout ds0 - time - slot
no ds0 busyout ds0 - time - slot
ds0 - time - slot DS0 time slots to be forced into the busyout state. Range is from
1 to 24 and
can include any combination of time slots.
voice class busyout
This sets up resources information to be monitored using busyout in which
items are collected.
voice class busyout <tag>
no voice class busyout <tag>
<tag>: From 1 to 31 can be used. designates Voice class tag
Use ‘busyout monitor <interface type> <interface name>’ for Busyout monitor
command used in Voice class busyout configuration mode, and use bundle and
Ethernet for interface type.
The followings are busyout monitor commands used in voice class busyout
configuration mode.
busyout monitor ethernet interface - number [ in-service ]
no busyout monitor ethernet interface-number
busyout monitor bundle interface - name [ in-service ]
no busyout monitor bundle interface-name