Samsung Ubigate iBG3026, Руководство по настройке

Страница: 474 / 718

CHAPTER 29. H.323 Gateway Management
432
© SAMSUNG Electronics Co., Ltd.
(Continued)
Step Command Purpose
3 destination-pattern number
Example)
/configure/dial-peer/voice/voip
100#destination-pattern 02.T
Specifies the telephone number
associated with the dial peer
Matches dialed digits to a telephony
device.
The string argument is a series of
digits that specifies the E.164 or
private dialing plan telephone
number.
Valid entries are the numbers 0
through 9 and the letters A through D.
You can also enter the following
special characters:
- The asterisk(*) or pound sign(#)
on standard touch-tone dial pads
can be used anywhere in the
pattern.
- The period(.) acts as a wildcard
character.
When the timer(T) character is
included at the end of
the destination pattern, the router
collects dialed digits until the
interdigit timer expires(5 seconds, by
default) or until you dial the termination
character(the default is #).
The timer character must be a
capital T.
4 session protocol {h323|sip}
Example)
/configure/dial-peer/voice/voip
100#session protocol h323
A session protocol for calls between
local and remote routers using the
packet network.
5 session target { ip-address {ipv4: ip-
address [: port ] | ipv6: ip-address [: port ]
| dns: userid@hostname [: port ] } | sip-
server | gatekeeper | name voip-peer-
name }
Example)
/configure/dial-peer/voice
100#session target ip-address
ipv4:192.168.10.100:1720
Specifies ‘gatekeeper’ as session
target if you want to run indirect
connection to be managed by
gatekeeper.
Specifies ip address as session
target if you want to run direct
connection to H.323 endpoint