Samsung Ubigate iBG3026, Руководство по настройке

Страница: 521 / 718

Ubigate iBG3026 Configuration Guide/Ed.00
© SAMSUNG Electronics Co., Ltd.
479
(Continued)
Step Command Purpose
3 shutdown Change status of voice port to shutdown
4 signal did {immediate| wink-start|
delay-dial}
This command enables Direct Inward
Dialing on the voice port
immediate - if the voice port must use
the immediate start protocol
wink-start - if the voice port must use the
wink-start protocol
delay-dial - if the voice port must use the
delay start protocol
5 locale locale Selects the two-letter locale for the voice
call progress tones and other locale-
specific parameters to be used on this
voice port
The Default is us
ex) locale us
6 timeouts timer-name timer-value To change timeouts parameters
initial - Sets the number of seconds that
the system waits between the caller input
of the initial digit and the subsequent
digit of dialed string.
A valid entry is from 0 to 120. The default
is 10
interdigit - Configures the number of
seconds that the system waits after the
caller has input the initial digit or a
subsequent digit of the dialed string.
If the timeout ends before the
Destination is identified, a tone sounds
and the call ends. This value is important
when using variable-length dial peer
destination patterns(dial plans).
The
seconds argument is the interdigit
timeout wait time in seconds. A valid
entry is an integer from 0 to 120.
The default is 5.
ringing - Specifies the duration that the
voice port allows ringing to continue if a
call is not answered.