Samsung Ubigate iBG3026, Руководство по настройке

Страница: 519 / 718

Ubigate iBG3026 Configuration Guide/Ed.00
© SAMSUNG Electronics Co., Ltd.
477
(Continued)
Step Command Purpose
13 - The period (.) acts as a wildcard character.
When the timer(T) character is included at
the end of the destination pattern, the
router collects dialed digits until the
interdigit timer expires(5 seconds, by
default) or until you dial the termination
character(the default is #). The timer
character must be a capital T.
14 port slot/subslot/port Maps the dial peer to a specific Port Number
15 exit Exits voice dial-peer configuration mode
Configuring Analog DID
This section describes the configuration of analog DID Feature.
DID Feature Overview
This section describes the analog DID Feature Direct Inward Dialing(DID),
which is the service proposed by Telephone service providers, is the service to
allow a caller to dial to extension of PBX without help of an attendant. DID
Feature enables every extension of a PBX to work like that every extension is
connected directly to PSTN.
Start Signal
Immediate Start
The originating end seizes the line by going off hook and, without waiting
for a response, it begins to outpulse digits. The address signaling used with
immediate-start signaling Consists only of dial-pulsing.
wink-Start
The originating end seizes the line by going off-hook. It waits for
acknowledgement from the other end before outpulsing digits. This serves
as an integrity check that will identify a malfunctioning trunk and allow the
network to send a re-order tone to the calling party.