Samsung SRN-1000 Скачать руководство пользователя страница 73

Страница: 73 / 122

English

_73

●

enu Se

Tup

recovering rAid Array

If the faulty/removed HDD number is displayed in <

Status/management

>, check the location of the HDD

to be replaced on the HDD map.

On the Web Viewer, shut off the NVR system.

Remove the failed HDD from NVR and replace it with a new HDD.

Reboot NVR, and the progress of recovery will be displayed if you select <

Setup

> - <

Storage device

- <

device

> - <

rAid

Only an admin account can perform RAID Building and canceling.

When replacing an HDD, use the same model or one from the same manufacturer that is of the same capacity.

Use the same model of HDD as recommended if you want to use it to compose an RAID array.

If it is impossible to use the same model, use an HDD with the same capacity from the same maker as the recommended

HDD.

If you remove power while using an RAID array, a problem can occur in the RAID array condition. Please avoid disconnecting

the power without shutting down.

For stable power, you are recommended to use a UPS.

When the RAID is activated, if you downgrade it to firmware that does not support RAID, the RAID array will be canceled and

all the data deleted.

If you downgrade the firmware, you must ensure that the firmware supports RAID.

Содержание SRN-1000



























































































































Результаты поиска

Содержание SRN-1000

Отзывы:

Похожие инструкции для SRN-1000

Бренды по названию

Популярные бренды

Samsung SRN-1000, Руководство пользователя

Результаты поиска

Содержание SRN-1000

Отзывы:

Похожие инструкции для SRN-1000

Бренды по названию

Популярные бренды