Samsung SRN-1000, Руководство пользователя

Страница: 61 / 122

English _61
●
m
enu Se
Tup
• Connection : Display the connection status.
• Register : This is the default registration button for a network camera.
It will be displayed < Auto > before registration, and will be changed to < delete > after registration.
• Data rate : Displays the total amount of data received from the channel.
• Performance : Displays the occupancy out of configured communication bandwidth for receiving the
corresponding data traffic.
Note that the cameras of RTSP and ONVIF protocols require about 2 times of data traffic to support control
traffic.
M
`
If NVR is set to the defaul values, camera(s) may not be connected. So, set the network environment before registeration.
For more information, refer to " Network Configuration ". (Page 82)
To auto-search for and register a network camera
1. Click the < Setup > menu.
2. Click the < device >-< Camera >-< registration > menu.
3. Click the < Auto > in Device Registration window.
“ Add Camera Automatically ” window appears to list up the available cameras present in the network.
`
Press the < Refresh > button to check the changes of networked camera(s).
4. Click the camera(s) to select from the list.
5. Enter relevant < id > and < password > for the selected camera(s).
6. Click the [ register ] button.
`
When registering multiple cameras selected in a batch, only cameras set with the same user ID and password from the selected
will be registered.
7. When “ Connection Test ” confirmation window appears, check the registration status and click [ oK ] button.
“ Add Camera Automatically ” window is closed and registered camera(s) is(are) displayed in the list.
8. Click [ oK ] button to complete the registeration.
`
If < Performance > exceeds 100% of the system capacity, you cannot register a camera further.