Samsung SRN-1000 Скачать руководство пользователя страница 35

Страница: 35 / 122

English

_35

●

Live viewer

Description

Video Input

Status

Camera Title /

Channel

Display the camera title and channel number.

Current date

and time

The current date and time are displayed.

This icon is displayed for a channel that a PTZ-featuring camera is connected to.

Displays AUDIO ON/MUTE.

Not displayed in video mode if deactivated.
If the sensor is set to <

>, the input signal will be displayed on the screen of the

connected channel.
Set the camera event detection to <

>, and a camera event will be displayed when

occurred.

Displays the current record mode from Record/Event/Schedule.

Displayed in Auto Sequence mode where all channels are switched at the specific time

interval.

Only and are displayed in 36-split and 64-split mode.

error information

•

If no built-in HDD is connected, the icon saying “NO HDD”(

) will be displayed in the upper left corner.

In this case, make sure you contact the service center for assistance as this may cause a failure of recording,

playback or backup.

•

If the cooling fan does not work properly or has a problem, the <

fan information

> window will appear and

the fan error icon ( ) will be displayed on the top left corner. In this case, check to see if the internal fan

works.

As a fan error can shorten the product life, make sure you contact the service center for assistance.

If you see the fan error icon or NO HDD, HDD FAIL icons on the screen, contact the service center for more details.

If NO HDD, HDD FAIL or fan error occurs, the front LEDs (ALARM, REC) keep blinking.

Содержание SRN-1000



























































































































Результаты поиска

Содержание SRN-1000

Отзывы:

Похожие инструкции для SRN-1000

Бренды по названию

Популярные бренды

Samsung SRN-1000, Руководство пользователя

Результаты поиска

Содержание SRN-1000

Отзывы:

Похожие инструкции для SRN-1000

Бренды по названию

Популярные бренды