Samsung SRN-1000 Скачать руководство пользователя страница 101

Страница: 101 / 122

English

_101

●

Appendix

Problem

Action

Not all of multiple external HDDs that I have installed

on the NVR are recognized by the NVR even if I

configured the necessary settings properly.

It may take time to recognize multiple external HDDs.

Try again in a minute. If the problem persists and not all of the external HDDs

are recognized, that is highly likely to an error of the external HDD it self.

Try with a different HDD or HDDs.

The time bar is not displayed in Search mode.

The timeline can switch between normal and extension mode.

In extension mode, the time bar may not be displayed in the current timeline.

Switch to normal mode or use the left or right button to navigate through the

time bar.

The “NO HDD” icon and an error message are

displayed.

Check the HDD for connection.

If the problem persists in a normal condition, contact the nearest service

center to have the HDD checked by the service personnel.

The front LEDs (ALARM, REC) keep blinking after

booting up the system.

The front LEDs (NO HDD, HDD FAIL or FAN ERROR) keep blinking.

You can check the description about corresponding failure on top left

side of the Live screen after connecting.

I have installed an additional HDD on the NVR but it

does not recognize the HDD.

See the compatibilty list to check if the additional HDD is supported by the

NVR. For the compatibility list, contact the retailer where you purchased the

NVR.

I have connected an external storage device (external

eSATA HDD) to the NVR but the NVR seems not to

recognize it.

See the compatibility list of external storage devices to check if the connected

device is supported by the NVR. For the compatibility list, contact the retailer

where you purchased the NVR.

If I press the ESC key in full screen mode of the

WebViewer, the system does not switch to a normal

split mode.

Press the ALT+TAB keys to select ‘ACTIVE MOVIE’ and press the ESC key

again. The system will switch to a normal split mode.

I forgot the password.

Contact the NVR administrator for help.

Содержание SRN-1000



























































































































Результаты поиска

Содержание SRN-1000

Отзывы:

Похожие инструкции для SRN-1000

Бренды по названию

Популярные бренды

Samsung SRN-1000, Руководство пользователя

Результаты поиска

Содержание SRN-1000

Отзывы:

Похожие инструкции для SRN-1000

Бренды по названию

Популярные бренды