Samsung SRN-1000 Скачать руководство пользователя страница 21

Страница: 21 / 122

English

_21

●

Conne

ing wi

Th o
Ther devi

Item

Description

Protocol

Network setting for the device.

The factory default is “IPv4”.

Devices with the IPv6 setting will be displayed “IPv6”.

URL

DDNS URL address enabling access from the external Internet.

However, this will be replaced with the <

IP Address

> of the device if DDNS registration has failed.

IPv4

Scans for devices with the IPv4 setting.

IPv6

Scans for devices with the IPv6 setting.

Scans for devices that are currently connected to the network.

However, this button will be grayed out if neither IPv4 nor IPv6 is checked.

Auto Set

The IP Installer automatically configures the network settings.

Manual Set

You should configure the network settings manually.

Exit

Exits the IP Installer program.

For the IP installer, use only the installer version provided in the installation CD or use the latest one if available.

You can download the latest version from the Samsung web site (www.samsungcctv.com).

Static ip Setup

manual network Setup

Run <

ip installer_vx.xx.exe

> to display the device search list.

At the initial startup, both [

Auto Set

] and [

manual Set

] will be grayed out.

Select a NVR in the search list.

Both the [

Auto Set

] and [

manual Set

] buttons will be

activated.

Click [

manual Set

The Manual Setting dialog appears.

The default values of <

ip Address

>, <

Subnet mask

gateway

>, <

hTTp port

> and <

port(TCp)

> of the NVR

will be displayed.

If found multiple devices assigned with the same IP address, assign different IP addresses to such devices to avoid conflict.

If conflict has been occurred by sharing the same IP address by multiple devices, recovering may take some time.

In the <

Address

> pane, provide the necessary information.

•

MAC (Ethernet) Address : The MAC (Ethernet) address of

the applicable NVR will be set automatically so you don't

need to input it manually.

You can configure the static IP settings only if the DHCP checkbox

is unchecked.

Содержание SRN-1000



























































































































Результаты поиска

Содержание SRN-1000

Отзывы:

Похожие инструкции для SRN-1000

Бренды по названию

Популярные бренды

Samsung SRN-1000, Руководство пользователя

Результаты поиска

Содержание SRN-1000

Отзывы:

Похожие инструкции для SRN-1000

Бренды по названию

Популярные бренды