Samsung SRN-1000 Скачать руководство пользователя страница 58

Страница: 58 / 122

58_

menu setup

To upgrade the current software version

Prepare the software to upgrade.

In case of server upgrade, NVR must be currently connected to the server in the network.

When a new firmware is available in the network, the corresponding icon appears to notify the update. (Page 34)

If connected through a proxy server, it may not be upgradable due to limited access.

Select the <

System manage

> in <

System

> window.

Select the <

upgrade

Select the prepared software and press OK.

You can execute Upgrade function only when the <

Version

> of <

S/W Upgrade

> is higher than the <

Software Version

> of

System Information

The screen changes according to each phase of upgrade.

The system restarts automatically after completing the upgrade.

Do not turn off the system power or disconnect the network until it is fully rebooted.

Try again from step 3 when “

Fail

” window prompts.

Contact your service center if you fail continuously.

Settings

You can copy and import the NVR settings by using a storage media.

Содержание SRN-1000



























































































































Результаты поиска

Содержание SRN-1000

Отзывы:

Samsung SRN-1000, Руководство пользователя, Страница: 58 / 122

Результаты поиска

Содержание SRN-1000

Отзывы: