background image

2-17

Operations & Installation

2-2-11  Registered Recall

You can place a new call directly after a call or transfer a call to another extension under PABX, using this
feature. 

To send a flash, simply press the Flash soft key while the line is engaged. The display shows F.

2-2-12  Tone Dial Switchover

To access certain services such as voice mail or interactive telephone system features, it is necessary to use tone
dialling. When your phone is set to the pulse mode, DTMF dialling is available.

1. Press the asterisk key (

) while on the phone in the pulse dial mode. Your phone is converted to the tone

dial mode temporarily. 

2. When you press the 

Flash

soft key or end the call, the phone automatically returns to the pulse mode.

2-2-13  Paging

You can page your handset from the base unit. Using this feature, you can find where the handset located.

Press the 

Paging

key on the base unit. The left lamp marked 

on the base blinks and all handsets

registered with the base will ring for about 10 seconds . 

Note: If an incoming call comes in while the handset is being paged, the handset stops paging and sounds the

ringer.

Содержание SP-R6100

























































































Отзывы: