Samsung Smart MBS RRH-P4, Руководство по установке

Страница: 157 / 162

Ver.
Smart MBS RRH-P4 Installation Manual
© SAMSUNG Electronics Co., Ltd. F-1
2600-00CTEIGAA 4.0
ANNEX F. Standard Torque
When you fasten the bolt, refer to the standard torque value below to prevent the equipment
and bolt from damage and fasten tightly. When the torque value for each connection part is
defined already, refer to the defined value.
Table F.1 Standard Torque Value for Tightening Bolts
Bolt Spec. Torque (kgf.cm) Torque (N.m) Torque (lbf.ft)
M3 4.08~6.12 0.40~0.60 0.29~0.44
M4 9.52~14.28 0.93~1.40 0.69~1.03
M5 20.0~30.0 1.96~2.94 1.45~2.17
M6 33.28~49.92 3.26~4.90 2.41~3.61
M8 82.4~123.6 8.08~12.12 5.96~8.94
M10 166.4~249.6 16.32~24.48 12.03~18.05
M12 292.0~438.0 28.64~42.65 21.11~31.67
Table F.2 Brass Bolts Torque
Bolt Spec. Torque (kgf.cm) Torque (N.m) Torque (lbf.ft)
M6 29.98 ± 10 % 2.94 ± 10 % 2.17 ± 10 %
M8 64.26 ± 10 % 6.3 ±1 0 % 4.16 ± 10 %
Check When Applying standard torque value
The torque value can change depending on the equipment and materials,
properties and specifications of the fastening bolts. Therefore, you must check the
appropriate torque value of each equipment and fastening bolts according to its
spec.