Chapter 5 Troubleshooting
Verizon 4G LTE Network Extender 2 for Enterprise User Guide v1.0
78
Copyright © 2019, All Rights Reserved.
Alarms and Troubleshooting
When a system alarm is raised, it shall be presented in the Admin Website for the
user. The alert shall include clear and simple description text as well as the
troubleshooting steps the user should follow to resolve the issue. The text for each
alarm/alert is presented in the following table.
Table 24. Alarms in the Network Extender Admin Website (Local)
Alert
Description
Troubleshooting
PROCESS_DOWN
An application block is
deactivated/terminated.
There is a temporary process alert, but your device is
still functioning correctly. No action is needed and the
alert should clear itself. If the alert persists, please
see the troubleshooting section of the user guide.
DISK_FULL
Disk usage has exceeded a
threshold.
There is a temporary disk usage alert, but your
device is still functioning correctly. This alert should
clear itself. If the alert persists for a long time, please
check the number of users in the "Connected
Devices" tab and see the capacity section of the user
guide.
MEMORY_FULL
Memory usage has
exceeded a threshold.
There is a temporary memory usage alert, but your
device is still functioning correctly. This alert should
clear itself. If the alert persists for a long time, please
check the number of users in the "Connected
Devices" tab and see the capacity section of the user
guide.
OVERLOAD
Average CPU load has
exceeded a threshold.
There is a temporary CPU load alert, but your device
is still functioning correctly. This alert should clear
itself. If the alert persists for a long time, please
check the number of users in the "Connected
Devices" tab and see the capacity section of the user
guide.
CLOCK_FAIL
The clock is abnormal.
There is a failure preventing your device from
functioning correctly.
If you are using GPS, please ensure that the GPS
antenna is installed in a location near the window. If
you are not able to receive GPS information after
repositioning the antenna, you may need to purchase
and install an external outdoor antenna. You may
need to check your firewall settings, as defined in the
user guide.
If you still experience an issue after checking your
GPS installation, please see the troubleshooting
section of the user guide.
POWER_FAIL
Power used within the
board is unstable or
abnormal.
Your power supply is unstable. Please check that
your power supply is stable. If the problem persists
please see the troubleshooting section of the user
guide.
PORT_DOWN
Outer Ethernet port is
down.
The port connecting your device to the internet is not
operational. Please check that your Ethernet cable is
connected correctly and the switch, router, or internet
gateway is powered-on.