Chapter 2 Network Extender Setup
Verizon 4G LTE Network Extender 2 for Enterprise User Guide v1.0
16
Copyright © 2019, All Rights Reserved.
o
The Network Extender State: The device has completed hardware
initialization and loaded all software.
o
LED State: Solid yellow
o
Admin Website State: The software is loaded. The Admin Website is
accessible.
The device has completed its autonomous hardware tests and loaded all software.
It will start the process of connecting to Verizon’s network and coming into
service. See the Admin Website chapter for information on how to log into the
Network Extender Admin Webpage.
3
Acquired IPv4/IPv6 address
("Acquired an IP address")
o
The Network Extender State: The device is running its software and has
started to connect to the Verizon network. The first step is to acquire a local
IPv4/IPv6 address.
o
LED State : Single blinking yellow (0.5 sec. on, 3.0 sec. off)
o
Admin Website State: The Admin Website is accessible.
The device has loaded software and has started to acquire a local IPv4/IPv6
address from the local DHCP server.
4
Conducting DNS lookups
("Identifying the Initial Network")
o
The Network Extender State: The device has acquired a local IPv4/IPv6
address from local DHCP. The next step is to conduct DNS lookups for the
public FQDNs provisioned at the factory.
o
LED State: Single blinking yellow (0.5 sec. on, 3.0 sec off)
o
Admin Website State: The Admin Website is accessible.
The Network Extender needs to resolve the FQDNs for A-GPS, and initial SeGW
from the public DNS server.
5
Attempting to reach the Initial SeGW
(“Attempting to reach Initial
network”)
o
The Network Extender State: The device has conducted DNS lookups for
the public FQDNs provisioned at the factory and is trying to contact the
initial SeGW.
o
LED State : Single blinking yellow (0.5sec. on, 3.0 sec off)
o
Admin Website State: The Admin Website is accessible.
This status details that the Network Extender has attempted to communicate with
the SeGW.
