Chapter 2 Network Extender Setup
Verizon 4G LTE Network Extender 2 for Enterprise User Guide v1.0
18
Copyright © 2019, All Rights Reserved.
o
The Network Extender State: The device has set up a VPN tunnel with the
initial SeGW and is awaiting a GPS fix before progressing.
o
LED State: Triple blinking yellow (0.5 sec. on, 0.5 sec. off, 0.5sec. on,
0.5sec. off, 0.5 sec. on, 3.0 sec. off)
o
Admin Website State: The Admin Website is accessible.
Until a GPS fix is provided, the device will not be able to continue and receive
configuration information.
10
Connection with the management system
("Connecting to Initial
Management Server")
o
The Network Extender State: The device acquired location information
and is connecting with the FeMS.
o
LED State: Quadruple blinking yellow (0.5 sec. on, 0.5 sec. off, 0.5 sec.
on, 0.5 sec. off, 0.5 sec on, 0.5 sec. off, 0.5 sec. on, 3.0 sec. off)
o
Admin Website State: The Admin Website is accessible.
The device will be allocated a serving FeMS and possibly an alternate serving
SeGW based on its location. It may re-establish IPSec to the new SeGW at this
point if required. If not, it will contact the FeMS and request configuration
information.
11
Software download in progress
o
The Network Extender State: The device is assigned a FeMS and has been
instructed to download new software.
o
LED State: Quadruple blinking yellow (0.5 sec. on, 0.5 sec. off, 0.5 sec.
on, 0.5 sec. off, 0.5 sec on, 0.5 sec. off, 0.5 sec. on, 3.5 sec. off)
o
Admin Website State: The Admin Website is accessible.
The device will download the newest software and reboot. The process will start
from the first steps again, but the GPS acquisition will occur much faster.
12
Configuration download in progress
