Chapter 2 Network Extender Setup
Verizon 4G LTE Network Extender 2 for Enterprise User Guide v1.0
19
Copyright © 2019, All Rights Reserved.
o
The Network Extender State: The device is communicating with the
Verizon management system (FeMS) and may have received new
software. It will need to complete the “Over the Air Receiver” before
receiving additional configuration parameters.
o
LED State: Quadruple blinking yellow (0.5 sec. on, 0.5 sec. off, 0.5 sec.
on, 0.5 sec. off, 0.5 sec on, 0.5 sec. off, 0.5 sec. on, 3.0 sec. off)
o
Admin Website State: The Admin Website is accessible.
During the OTAR process, if no adjacent neighbor Network Extenders or Macro
cells are detected, the Verizon Management system (FeMS) will then provide the
configuration solely based on the GPS location.
13
Operational status
o
The Network Extender State: The device is in normal in-service operation
and has completed all steps.
o
LED State: Fast blinking green (0.25 sec. on/0.25 sec. off)
o
Admin Website State: The Admin Website is accessible.
If the LED state is alternate blinking Red-Green instead of fast blinking green, this
means an alarm condition has occurred. In this case, please refer to the
Troubleshooting chapter for more information on alarm codes.
