Chapter 2 Network Extender Setup
Verizon 4G LTE Network Extender 2 for Enterprise User Guide v1.0
17
Copyright © 2019, All Rights Reserved.
6
Successfully reached the Initial SeGW
(“Successfully reached the Initial
network”)
o
The Network Extender State: The device has contacted the initial SeGW
successfully.
o
LED State : Single blinking yellow (o.5 sec. on, 3.0 sec. off)
o
Admin Website State: The Admin Website is accessible.
Status details that the device can communicate with the SeGW and IPSec tunnel
are not established at this point.
7
VPN setup to Initial SeGW completed
("Authentication to Initial Network
completed successfully")
o
The Network Extender State: The device has set up a VPN tunnel with the
initial SeGW.
o
LED State: Single blinking yellow (0.5 sec. on, 3.0 sec off)
o
Admin Website State: The Admin Website is accessible.
This confirms that the device has set up a VPN connection with Verizon’s
network.
8
Authentication failure during IPSec tunnel setup to Initial SeGW
("Authentication failure to Initial Network. Unit is not provisioned. Please
contact Verizon Wireless Customer Care for further assistance")
o
The Network Extender State: The device has failed to set up a VPN tunnel
with the initial SeGW with an explicit “Authentication Failure.”
o
LED State: Double blinking red (0.5 sec. on, 0.5 sec. off, 0.5 sec. on, 3.0
sec. off)
o
Admin Website State: The Admin Website is accessible.
This details that the device been notified it failed authentication with the Verizon
Authentication server.
9
GPS acquisition in progress
("Waiting for GPS position fix")
