Call Functions 47
3.
Press
➔
Call duration
.
4.
The following times are displayed for Voice:
• Last call
: shows the length of time for the last call.
• Dialed calls
: shows the total length of time for all calls made.
• Received calls
: shows the total length of time for all calls
received.
• All calls
: shows the total length of time for all calls made and
received.
5.
You may reset these times to zero by pressing
then tapping
Reset
.
Options During a Call
Your phone provides a number of control functions that you
can use during a call.
Adjusting the Call Volume
During a call, to adjust the earpiece volume, use the
Volume
keys on the left side of the phone.
Press the
Up
volume key to increase the volume level
and press the
Down
volume key to decrease the
volume level.
From the Home screen, you can also adjust the ringer volume
using these same keys.
In-Call Options
During an active call there are several functions available by
tapping a corresponding on-screen button.
•
Hold
: place the current active call on hold.
•
Add call
: displays the dialer so you can call another person.
•
Keypad
: displays the on-screen keypad, where you can
enter number using DTMF (Dual Tone Multi-Frequency).
•
End call
: terminates the call.
•
Speaker
: routes the phone’s audio through either the speaker or
through the earpiece.
–
Tap
Speaker
to route the audio through the speaker. (You can
adjust the speaker volume using the volume keys.) A green line
will appear under the Speaker button.
–
Tap
Speaker
again
to use the phone’s earpiece (see
“Using
the Speakerphone During an Active Call”
on page 50) The
green line will turn grey when Speaker is not activated.
•
Mute
: turn the onboard microphone either on or off.
–
Tap
Mute
during a call to mute the microphone. A green line
will appear under the Mute button.
–
Tap
Mute
again to unmute the microphone. The green line will
turn grey when Mute is not activated.
•
Headset
: connects to a Bluetooth headset.