Samsung CLX-9251 Series Скачать руководство пользователя страница 217

Страница: 217 / 481

4. Troubleshooting

4.4.5.4. Adjustment

Print Adjustment

•

Diagnostics > Adjustment > Print Adjustment > Automatic Adjustment

Purpose

To correct image position of print-outs automatically.

Operation Procedure

1) Press “Paper Supply” button and select a tray.

2) Press “Paper Size” button and select a paper size of the previously selected tray.

3) Press “Print” button. A test pattern will be printed out.

4) Press “Next” button. The system ask to locate the test pattern.

5) Locate the front side of Scanner A/S Chart at the scanner glass .

NOTE

DADF cannot be used.

6) Press “OK” button. Automatic scanning will occur .

7) Locate the back side of Scanner A/S Chart at the scanner glass again and press “OK” button

once more.

8) The system will automatically calculate the proper value based on scanning result of the

test pattern.

9) The new values are set to the system.

Verification

Print out and check if all the position of scale marks (a, b, e, f) in the image are located within the
specified limit.

Specification

a, b, e, f : 10 mm, ± 1.5 mm

Reference

Scanner A/S Chart

■ Scanner A/S Chart

Front Side

Back Side

4-32

Содержание CLX-9251 Series
























































































































































































































































































































































































































































































Результаты поиска

Содержание CLX-9251 Series

Отзывы:

Похожие инструкции для CLX-9251 Series

Бренды по названию

Популярные бренды

Samsung CLX-9251 Series, Руководство по обслуживанию

Результаты поиска

Содержание CLX-9251 Series

Отзывы:

Похожие инструкции для CLX-9251 Series

Бренды по названию

Популярные бренды