Samson 3510, Монтаж и эксплуатация

Страница: 7 / 48

EB 8091-1 EN 7
Safety instructions and measures
Referenced standards and regulations
The control valves comply with the requirements of the European Pressure Equipment Direc-
tive 2014/68/EU.
According to the ignition risk assessment performed in accordance with EN 13463-1:2009,
section 5.2, the non-electrical control valves do not have their own potential ignition source
even in the rare incident of an operating fault. As a result, they do not fall within the scope of
Directive 2014/34/EU.
Î
For connection to the equipotential bonding system, observe the requirements specified in
section 6.4 of EN 60079-14 (VDE 0165 Part 1).
Referenced documentation
The following documents apply in addition to these mounting and operating instructions:
− Mounting and operating instructions for mounted actuator, e.g.
u
EB 8310-1 for
Type 3271 and Type 3277 Pneumatic Actuator with 120 cm² actuator area
−
Mounting and operating instructions for mounted valve accessories (positioner, solenoid
valve etc.)
−
u
AB 0100 for tools, tightening torques, and lubricant
−
For oxygen service: Manual
u
H 01
1.1 Notes on possible severe personal injury
DANGER !
Risk of bursting in pressure equipment.
Control valves and pipelines are pressure equipment. Improper opening can lead to
valve components bursting.
Î
Before starting any work on the control valve, depressurize all plant sections
concerned as well as the valve.
Î
Drain the process medium from all the plant sections concerned as well as the
valve.
Î
Wear personal protective equipment.