User's manual
Rotary Snow Blower
Tornado
-
10
-
3.
DESIGNATION AND CONSTRUCTION
3.1.
Intended use
Rotary snow blower
Tornado
is designed for clearing snow from roads, parking lots,
squares with minor unevenness or any other similar works of putting aside or loading onto a
trailer. It is designed for mounting on either front (for driving forward) or rear (for driving
backward or forward) tractor's 3-point linkage.
3.2.
General design
Well-proven design and quality materials ensure high reliability and durability of SaMASZ
machines. Rotary snow blower
Tornado
generally consists of linkage, working assembly and
hydraulically adjustable blowing tube. Tornado blowers can have optionally mounted tube
extension to extend its height, owing to which loading collected material onto a trailer is possible.
More detailed design of rotary snow blower
Tornado
is provided on
Fig. 5.
Fig. 5.
Design of rotary snow blower
Tornado
A
– catch
G
– blowing tube extension,
B
– body
H
– milling screw
C
– guide
I
– rotor
D
– gear
J
– gauge plate
E
– built-in intermediate shaft
K
– sliding skid
F –
blowing tube
–
transport holders Tornado 250
Blowing tube along with its extension has been designed so as to enable quick mounting and
dismounting of these parts. Therefore, if there is need for quick dismounting of the tube for repair,
transport or performing extension (distraction), it is enough to unlock and take out mounting pins
located at the tube (extension) base, and then separate the tube and the extension. In order to re-
mount blowing tube, perform the above in reverse order.
