User's manual
Rotary Snow Blower
Tornado
-
20
-
protect metal surfaces with thin layer of solid grease, e.g. ŁT – 43, or mineral engine or
gearbox oil, e.g. 15W40,
complement or replace illegible warning and information decals,
protect connection nozzles of hydraulic hoses.
NOTE:
Rotary snow blower should be stored with blowing tube cylinder retracted in
dry and clean place, away from access of unauthorized personnel
and animals. The blower should rest on even and paved ground under roof or
any other cover providing protection against precipitation.
8.
TRANSPORT
When transported rotary snow blower should be secured properly so as to prevent its
shifting. When placing the blower onto transport vehicle, it should be lifted up with use of
transport holders as provided on
Fig. 3
and marked with special decals (
Tab. 1
). Lifting should be
performed with lifting device with load not less than snow blower’s overall weight.
9.
TECHNICAL CHARACTERISTICS
Tab. 4.
General characteristics of rotary snow blower
Tornado
Machine type
Tornado 200
Tornado 250
Tornado 251
Working width [cm]
200
250
250
Shield's height [mm]
90
100
90
Dimensions: l /w /h [cm]
142/205/210
105
/
250
/
225
142/251/210
Snow blowing direction
360˚
Snow blowing distance [m]
15
3 – 20
15
Blowing rotor diameter [cm]
60
80
60
Collecting screw diameter [cm]
63
48
63
Weight [kg]
680
900
760
3-point linkage hitch type
3-point linkage category II
Required number of hydraulic
connectors
4 (2 pairs)
PTO rears [rpm]
540 – 750
Cooperating tractor power [HP]
from 80
from 100
