background image

 

 

User's manual 

Rotary Snow Blower 

Tornado 

 

5

 - 

2.

 

SAFETY CONDITIONS 

NOTE: 

Rotary snow blower can only be operated by personnel who learned contents  
of  this  manual.  Each  operator  of  blower  should  be  fully  aware  of  potential 
risks resulting from its operation and should know how these are avoided.

 

 

2.1.

 

Safety principles 

 

Prior to operation read the operator's manual carefully. 

 

Ignorance of the operator’s manual can lead to blower's damages. 

 

DO NOT use blower to applications other than mentioned. 

 

DO  NOT  apply  any  modifications  of  construction  without  prior  arrangement  with  the 
manufacturer. 

 

When driving on public roads always respect the local traffic regulations. 

 

Operating speeds of the tractor and plow set should be adjusted to operating conditions such as: 
size of unevenness, presence of stones, curbs and other municipal obstacles, 

 

It is recommended to keep low operating speed – with low tractor gears engaged. Operation with 
higher speed may expose the operator to injuries and blower’s and tractor’s 3-point linkage parts 
to damaging. 

 

There should be no unauthorized personnel present within the blower’s operating reach. 

 

Prior to operating, the machine should undergo a technical inspection paying particular attention 
to  condition  of  basic  connections  of  machine’s  assemblies  as  well  as  proper  mounting  of  the  
machine to a tractor. 

 

When performing  any activity requiring lifting onto tractor’s 3-point linkage, it is necessary to 
protect the blower from falling. 

 

Bolts and other fasteners should be inspected on regular basis. Operating with damaged or worn 
fasteners is not admissible. 

 

No person or object is allowed to be present on the blower when transported or operating. 

 

Blower should be mounted on tractor only with genuine pins and safety devices. 

 

When not operating, the blower should be in standstill position. 

 

Damaged hydraulic hoses and other hydraulic parts should be replaced with new ones. 

 

Use only genuine spare parts, which can be ordered at our store or at your dealer. 

 

For any repair, maintenance and adjustment works always wear safety gloves. 

 

Do not leave the tractor  with mounted blower on slopes.  If need be, the  engine should be shut 
down, tractor’s parking brake engaged and the blower lowered. 

 

The  blower  should  be  stored  in  a  roofed  place,  in  compact  position  –  with  cylinders  off  to 
provide good protection of bearings. 

 

In case of a fatal failure, stop the machine's drive, turn the tractor's engine off and take out the 
ignition  key.  Then  call  for  technical  service,  and  if  an  accident  (in  this  case:  road  accident) 
occurs, respect first aid rules and contact responsible authorities. 

 

In the event of any break in the equipment operation, turn off the drive. 

 

The operator is not allowed to leave the tractor while driving.

 

 

NOTE: 

Securing  both  danger  area  and  activity  performed  shall  lie  under 
responsibility of the person in charge of the machine transporting. 
 
 

Содержание Tornado 200

























Отзывы: