User's manual
Rotary Snow Blower
Tornado
-
12
-
4.
EQUIPMENT AND SPARE PARTS
4.1.
Standard equipment
Rotary snow blower is delivered with the following standard equipment:
Operator's manual with warranty card,
Catalogue of spare parts,
Steel HARDOX clearance bar,
Blowing tube hydraulic control,
Built-in intermediate shaft,
Telescopic articulated drive shaft,
Spray paint (150ml).
4.2.
Optional equipment
Blowing tube extension,
hydraulic directional valve for machine's aggregation with a tractor with one pair of hydraulic
connectors.
4.3.
Spare parts
Spare parts should be ordered according to spare part catalogue by giving full name of the
part as well as its catalogue no.
NOTE:
Use only genuine SaMASZ fittings and spare parts. Spare parts of unknown
origin or new made feature lower strength and have unfavorable influence on
machine’s performance and overall safety.
NOTE:
The SaMASZ co. does not bear any responsibility for damages and defects
caused as a result of applying non-genuine parts and fittings.
5.
OPERATING ROTARY SNOW BLOWER
5.1.
Mounting blower to tractor
Conditions of mounting blower to tractor:
Rotary snow blower
Tornado
has been designed as front-mounted machine with possibility
of mounting at tractor's rear according to client’s individual needs.
Tractor should be equipped with at least two pairs of hydraulic outlets (4 connectors) or one
pair (2 connectors) providing optional mounting of hydraulic directional connector enabling
mounting the machine on a tractor with one pair of hydraulic connectors.
