User's manual
Rotary Snow Blower
Tornado
-
13
-
Fig. 7.
Mounting blower
Tornado
on 3-point linkage
As shown on
Fig. 7
, in order to mount the machine on drive its catch with a tractor so, that
lower links of tractor's 3-point linkage (
1
) are in into eyes found on blower's linkage (
2
),
immobilize the tractor and protect it from rolling, and then lock with pins and protect with cotters.
Connect upper points of blower's and tractor's linkages with link (
3
), lock with pins (
4
) and protect
with cotters, and then adjust the machine's tilt. Next connect hydraulic connectors and if need be,
remove machine's side plays providing corresponding adjustments to lower links' stabilizers (it is
recommended, that both of 3-point linkage lower links are on the same height). Finally mount
telescopic articulated shaft (
5
) according to subsection
5.2.
If, after mounting and lowering to
working position, the blower is set otherwise than shown on
Fig. 7
, e.g. as on
Fig. 8
, adjust it with
upper link (
3
) by winding or unwinding it.
Fig. 8.
Improper position of rotary snow blower
Tornado
in working position
If need be for use of rotary snow blower mounted on tractor's rear 3-point linkage when
driving tractor forward, then take a catch from machine's rear (at gear's side) and place it on its
front (
Fig. 9
), and then mount the machine as described above.
