Salvis Master, Руководство по эксплуатации

Страница: 27 / 56

en
27 / 56
Pilot burner nozzle Reduction nozzle Nozzle type Outer nozzle
Gas type
For pilot burner nozzle
replacement, refer to
page28, chapter7.4 Refer to page27, chap­
ter7.3
Nozzle type
Refer to page27, chap­
ter7.2
Gas type
Nozzle type
Gas type
NO - Category: II
2H 3B/P
Natural gas H
Primary pressure
20 mbar
(NO)
ø1,85 mm ø 1,05 mm Two bores of
ø0.25 mm each
Liquid gas B/P
Primary pressure
30 mbar
(NO)
ø1,30 mm ø0,65 mm ø0,20 mm
7.2 Outer nozzle replacement
.
Loosen the threaded pin until the connector
can be withdrawn.
.
Withdraw the connector.
.
Replace the outer nozzle, refer to the data
stated in the table on page25, chapter7.1
.
Insert the connector down to the limit stop
and secure it by means of the threaded pin.
.
Check all gas-bearing components for the
leak tightness.
7.3 Replacing the reduction nozzle
.
Replace the reduction nozzle, refer to the
data stated in the table on page25,
chapter7.1
.
Screw in the reduction limit down to the limit
stop.
.
Check all gas-bearing components for the
leak tightness.
Threaded pin
Outer nozzle
Connector
Reduction nozzle