Saluki S3302SB, Руководство пользователя

Страница: 27 / 199

Tel: 886.909 602 109 Email: sales@salukitec.com
www.salukitec.com
27
Section 2 Interface Description
Peripheral interfaces of S3302 series are mainly concentrated on the top panel, as shown in Fig. 3-3, and can be
divided into three parts: power interface, test port and digital interface.
Fig. 3-3 Interface Description
2.1. Power interface
The power interface of the device is for powering the device through DC output of AC-DC adapter or through
external DC power source. The conductor inside the external power interface is positive and the external conductor
is grounded.
2.2 Test ports
1) RF input port: It is used for inputting the signal to be tested. The indicator of the test signal input port of
S3302 series is 50Ω. The N-type female port is applied for S3302A/B and 2.4mm male port for S3302C/D.
2) RF output port: This port is for signal output. 50Ω impedance, N-type female port, provided only when
customers need the tracking generator option
3) 10MHz Input/Output port This port is for connecting 10MHz signal of other devices as the reference signal of
the analyzer. It can also be used for outputting the internal 10MHz reference signal for other devices.
4) IF output port: Under zero span, this port can be used for outputting the third or fourth IF signals for other
devices through software configuration.