Saluki S3302SB, Руководство пользователя

Страница: 20 / 199

Tel: 886.909 602 109 Email: sales@salukitec.com
www.salukitec.com
20
The battery can be charged when S3302 series spectrum analyzer is OFF or operating. Charging steps:
a) Install the battery to be charged into the machine.
b) Connect the external power supply with the accompanying AC-DC adapter.
c) If the battery is charged in the OFF state, the power indicator in the left lower corner of the front panel will be
yellow and flicker, indicating that the battery is being charged, and after the battery is fully charged, the
indicator will be yellow and normally on. If the battery is charged in the operating state, the power indicator
will be green and flicker, indicating that the battery is being charged, and after the battery is fully charged,
the indicator will be green and normally on. In this case, the battery icon on the right side of the system
status bar of the display will be full.
In addition, the battery power more than 5% should be charged for about 4h in the shutdown status.
Section 4 User Inspection
1
Start-up of spectrum analyzer
Connect S3302 series spectrum analyzer to the external power supply with the power adapter. Observe the power
indicator on the front panel. If the power indicator is yellow, it indicates that the standby power supply is normal.
Gently press the power switch on the front panel for more than 3s. Observe whether the power indicator on the front
panel turns green and whether the backlight of the display is ON. You should wait for about 30s for start-up of the
display. Then the normal start-up image will appear. The display screen should include no warming prompt 10min
after start warm-up.
Note: “Flicker” of the indicator indicates that the electricity quantity of the internal battery is not full and the battery is
being charged.
2 Shutdown of spectrum analyzer
Press the yellow power switch [ ] in the left lower corner of the front panel for about 3s. The spectrum analyzer
will automatically exit the measurement application program, and the power supply will be shut down.