Saluki S3302SB, Руководство пользователя

Страница: 104 / 199

Tel: 886.909 602 109 Email: sales@salukitec.com
www.salukitec.com
104
·[Main Ch BW]: press [Measure]→[More 1 of 2]→[Coverage Map]→
[Measurement Setup]→[ACPR]→[Main Ch BW], to set the main channel
bandwidth.
·[Adj Ch BW]: press [Measure]→[More 1 of 2]→[Coverage Map]→
[Measurement Setup]→[ACPR]→[Adj Ch BW], to set the adjacent
channel bandwidth.
·[Ch Spacing]: press [Measure]→[More 1 of 2]→[Coverage Map]→
[Measurement Setup]→[ACPR]→[Ch Spacing], to set the channel interval
space.
·[Adj Ch Offset]: press [Measure]→[More 1 of 2]→[Coverage Map]→
[Measurement Setup]→[ACPR]→[Adj Ch Offset], to set the adjacent
channel offset.
·[Good]: press [Measure]→[More 1 of 2]→[Coverage Map]→
[Measurement Setup]→[ACPR]→[Good: ≥ 0.0dBm], to set the color when
the measured signal is greater than this value.
·[Poor]: press [Measure]→[More 1 of 2]→[Coverage Map]→
[Measurement Setup]→[ACPR]→[Poor:<0.0dBm], to set the color when
the measured signal is lower than this value..