Tel: 886.909 602 109 Email: [email protected]
82
It is used to enable or disable the saved reference trace in the window.
[Trace Sel]
It is used to select the object towards which the parameter in the lower part of the current trace display window points,
e.g. Channel A, Channel B or reference trace.
[Text]
It is used to report the measurement results of Channel A and Channel B in the form of text, e.g. Rise time, pulse width,
pulse period and peak power.
[Resolution]
It is used to set the digit display resolution in the digit display window, which can be selected from 1 to 4.
If the measurement unit is dBm or dB, the resolution will be 1, 0.1, 0.01 or 0.001 dB; if the measurement unit is W or %,
the resolution will be the significant figure 1, 2, 3, or 4.
[Digit Unit]
It is used to set the digit unit of the current window, including "Log" and "Lin". If "Log" is set, the unit will be dBm or
dB; if "Lin" is set, the unit will be W or %.
[Grid Type]
It is used to set the grid type of waveform display in the trace display mode. The user can select
“
Blank
”
,
“
XHair
”
,
“
Grid
”
or
“
Hash
”
.
4.2.6 System
Press [Menu]>[System] to enter the [System] menu.
[Remote Interface]
It is used to configure the GPIB address and network address of the instrument.
[Up]
It is used to move the focus to the previous item.
[Down]
It is used to move the focus to the next item.
[Apply]
It is used to apply the modified setting. For the option to be modified, the focus can be moved through the [Up], [Down],
[Left] and [Right] keys. When the focus is moved to the position to be modified, the value can be entered directly. After
modification, it is necessary to press [Apply] to validate the modified option.
