Sakai SW884, Руководство оператора

Страница: 55 / 127

2 OPERATION
– 50 – – 51 –
1) Select mode according to propel condition.
position : Work condition
• The AUTO SPEED function can be
controlled with this mode (refer to page 55).
• Maximum speed is regulated by each
vibration frequency in the case of SW884
and SW994.
• Maximum speed is regulated by each vibration type in the case of
SW884ND.
ECO or FULL position of the Engine speed selector switch.
position : Traveling condition 0
–
6.8mile / h (0
–
11km / h).
NOTE: Selection is applied only when the F-N-R lever is in the neutral position.
WARNING
• On a steep slope, run the machine at low speed.
• Do not attempt to shift speed while traveling.
IMPORTANT
Be sure to shift gears while the machine is stopped. Can not shift gear during
running.
Vibration type
Propel speed
mile / h (km / h)
Ordinary Vibration 0 – 3.4 (0 – 5.5)
Oscillational Vibration 0 – 4.0 (0 – 6.4)
Frequency
(vpm)
Propel speed
mile / h (km / h)
2,500 0 – 2.8 (0 – 4.5
）
3,000 0 – 3.4 (0 – 5.5
）
4,000 0 – 4.5 (0 – 7.2
）
Travel mode selector switch