Sakai SW884, Руководство оператора

Страница: 66 / 127

2 OPERATION
– 62 –
3) Procedures for parked manual regeneration
①
Turn off the vibrator.
②
Move the machine to a safe place.
(The exhaust gas temperature will rise during parked manual regeneration, so beware of
burns, trees lining streets, fires, ventilation, etc.)
③
Move all F-N-R levers to the neutral position.
④
Press the Parking brake switch.
⑤
Let the engine idle.
⑥
Check to make sure that the disable regeneration lamp is turned off.
⑦
Press the Parked manual regeneration switch.
(Regeneration is complete when all the indicator lamps turn off. Be sure to let the engine
idle for 5 minutes after completion of regeneration)
* If the temperature gauge is in the position (C) before carrying out parked manual
regeneration, let the engine warm up.
CAUTION
• The exhaust gas temperature will rise during regeneration, so beware of burns,
fires, etc.
• The SCR must never be modified. The machine will not be able to function
properly, and it will not satisfy exhaust gas emissions standards.
• Do not turn the engine off immediately after regeneration.
Put the throttle lever in the idling position, and let the engine idle to gradually
cool it for around 5 minutes.
• Stopping the engine suddenly without letting it cool may shorten the life span of
engine parts.
• Continuing to use the machine without carrying out regeneration when the
parked manual regeneration lamp / regeneration lamp is flashing may, in the
worst case scenario, result in a limit being placed on the engine output.
Promptly carry out parked manual regeneration.
• Parked manual regeneration can be carried out any time, but limit it to once daily
except when the parked manual regeneration lamp / regeneration lamp flashes.
• Operating the Parking brake switch or accelerator lever during parked manual
regeneration will automatically stop regeneration. Restart parked manual
regeneration in accordance with the prescribed procedures.
4) Carrying out regeneration on cold days.
Be sure to let the engine warm up adequately on cold
days before carrying out regeneration.
As a rough guide, let the engine warm up until the
Temperature gauge indicates the position shown in the
illustration on the right.
Temperature gauge
温度計