Sakai SW884, Руководство оператора

Страница: 80 / 127

2 OPERATION
– 76 –
5) With the engine running at idle, perform loading by means of the trailer winch.
6) When the loading is completed, set the unloader valve back in the ONLOAD position.
7) Locate the machine correctly on the trailer.
2.12.2 Self-propelling
1) Engage the trailer brake and chock its wheels. Fix the
ramps so that the machine and trailer are completely
aligned.
☆
The angle between the ramps and ground must be
less than 15 degrees.
☆
Leave a proper space between the ramps according
to the width of the roller drum.
2) Decide the correct direction of run and conduct loading
or unloading at low speed.
For loading, run forward at low speed.
For unloading, run backward at low speed.
3) Locate the machine correctly on the trailer.
2.13 After Loading the Machine
When the machine has been located properly on the trailer, tie it down as follows:
1) Press the Parking brake switch to apply the parking brake. Place chock under the drums
to prevent movement.
2) Fix the machine with ropes tied at the front and rear towing hook holes. Particularly, pay
attention to sidewise skidding.
Less than 15°
Ramp
Wooden
block
Chock
Backing at
low speed
Forward run
at low speed