Sakai SW884, Руководство оператора

Страница: 75 / 127

2 OPERATION
– 70 – – 71 –
2.7.3 Operation
1) When the ignition is turned to the position, the rolling speed display shows [0.0] after
approximately 2 seconds. If the display shows any other message, there may be problems.
Refer to page 72 for details.
2) Select the desired frequency from 2,500 vpm, 3,000 vpm, or 4,000 vpm by means of the
Vibration frequency selector switch.
3) Select the desired Impacts Per Foot from 10, 11, 12, 13, 14, 15 IPF by means of the IPF
selector switch.
4) When the machine travels with vibration on, the illuminated color of the Impact frequency
lamp moves in accordance with the rolling speed and the Impacts Per Foot selection.
5) In order to execute compaction work at the desired vibration frequency and IPF setting,
the work should be performed at the rolling speed where the center green light stays
illuminated.
6) Using the AUTO SPEED function (refer to page 55) will assist compaction work.
The following table shows reference with Frequency / I.P.F. / Propel speed.
CAUTION
• When using the EXACT COMPACT METER in vibratory mode, be sure to run the
engine at ECO or FULL engine speed.
• If the engine is not running at the ECO or FULL speed position, the EXACT
COMPACT METER may display inaccurate results.
NOTE: Increase the rolling speed when Yellow light is illuminated.
Reduce the rolling speed when the Red light is illuminated.
Selection is applied in the case of the SW884, ordinary vibration of the SW884ND,
and the SW994.
2.8 Machine Controller Diagnoses
If error code like as E XX is displayed on the EXACT COMPACT METER, some kind of error
has been detected.
CAUTION
When an error is detected, the engine may stop to urgently stop the machine.
Frequency
(vpm)
I.P.F. (MPH)
10 11 12 13 14 15
2,500 2.8 2.6 2.4 2.2 2.0 1.9
3,000 3.4 3.1 2.8 2.6 2.4 2.3
4,000 4.5 4.1 3.8 3.5 3.2 3.0