Sakai SW884, Руководство оператора

Страница: 46 / 127

2 OPERATION
– 42 –
WARNING
• The seat shall be adjusted before starting any works or when the driver is
switched over the other person while the machine is completely stopped.
• Do not adjust the seat while the machine is in motion.
• Some unexpected troubles may be accidentally caused if moving the machine
without completely fixing the seat such as while sliding the seat. Before moving
the machine, make certain that the seat is completely fixed after making proper
adjustments.
• Do not pinch your fingers, hands or legs while adjusting the seat.
• Adjust seat only when one person rides on the machine.
• Adjust seat only when the machine stays on the flat ground.
• Adjust the seat so that your back is in close contact with the back of the seat
while seated and when stepping on the Brake pedal down to the floor. Adjust
the seat so as to be able to certainly step on the Brake pedal when twisting your
body around to look back in order to move the machine backwards.
IMPORTANT
Be sure to wear the seatbelt during operation.
2.2.2 Accessory socket
The Accessory socket may be used when the Starter
switch is turned to the position.
Open the cover, and a 12 V DC can be drawn from the
socket for powering electronic equipment.
WARNING
When connecting electronic equipment to the
Accessory socket, make sure it does not obstruct
the raising and lowering of the F-N-R lever.
CAUTION
• Use electronic equipment that consumes no more than 120 W (12 V, 10 A).
• Keep the cover closed when not in use to prevent foreign matter from getting
inside.
• There is a possibility of the battery running flat when the Accessory socket is
used for a long time to power electronic equipment with the engine turned off or
idling.
Accessory
socket